Joined in 2023 
82 
63 About this deal
This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest.
If you want further reassurance, you can also look for fans with accreditation from the Noise Abatement Society. These products will be marked with the Quiet Mark, which is given to the manufacturers of the most silent products produced around the world. Vent-Axia has really pushed the boat out with this brand-new model. Aside from shifting up to 39l of damp air per second, this bathroom extractor comes crammed with more sensor tech than any other model on the market. In fact, it has a sensor for everything, even odour. Yes, that’s right, when this clever little air mover detects a nasty smell, it either switches itself on or, if already running, speeds up the fan, returning the bathroom to its original sweet-smelling scent in a thrice. Finally, if you think you (or anyone else in the house) will forget to turn the fan on, consider a model with a humidity sensor. This automatically activates the fan when the level of moisture in the air exceeds a certain threshold. This sensor may need occasional cleaning, though, or the accumulation of dust or grime will hinder its effectiveness. What about noise?
Recorded at 26 dB, it’s on par with the Envirovent and louder than the Awenta, although the Awenta offers extraction of less litres per second. So, if you have a bigger bathroom or condensation is a problem, it might be better you go for a slightly louder model that has more power. You do have the option of turning it off, but if you allow moisture to build up for a long time, the fan may struggle to get rid of it all by the time you turn it on. If your fan has a humidity sensor, you may not be able to turn it off which could ruin your chance at a peaceful soak. Until you have one, it’s hard to explain the difference a silent bathroom extractor fan will make. It sounds silly, but removing unnecessary noise really does make a difference, especially when trying to unwind from a hard day. Yes, it is highly recommended to get a bathroom fan with a humidity sensor. This type of fan can detect the level of humidity in the bathroom and automatically turn on and off accordingly. This is important because high humidity levels can cause mould and mildew growth, which can be harmful to your health and damage your bathroom. A bathroom fan with a humidity sensor can also help reduce moisture buildup, prevent condensation on mirrors and walls, and improve air quality. In addition, this type of fan is convenient and energy-efficient, as it only runs when needed. Overall, investing in a bathroom fan with a humidity sensor is a smart choice for maintaining a healthy and comfortable bathroom environment.
This model comes in four variations, each with different extras like a Timer, Pull Cord and Humidistat. The variation with a Timer and Humidistat is the most expensive option, but one well worth looking into. The Xpelair C4HTS is a terrific extractor fan choice, coming in at 20 dB. Advertised at 16 dB we believe it’s closer to 20 dB, which is still the quietest we’ve tested. This could be a good combo with the overrun timer; if there’s still a lot of moisture, even after the overrun, the humidity sensor will activate and complete the job. Do be aware, though, that the sensor won’t work as well if it’s dirty. Wipe it down every couple of months to ensure it works as intended.
The best bathroom extractor fans you can buy in 2023
Available in seven different colours, the Awenta offers an affordable option with features you’d expect. Modern looking, this extractor fan fits in well with newly renovated rooms or extensions. The fan is switched on and off by means of a switch (not included in the device) being a part of the electrical installation of the building, but it will turn off after the time set by a potentiometer on the PCB has elapsed. The minimum delay is 3 minutes, the maximum - 30 minutes. Time delay adjustment is smooth. A humidistat is a device that measures the level of humidity in the air. When it is installed on an extractor fan, it helps to regulate the amount of moisture in a room or space by automatically turning the fan on or off depending on the humidity level. When the humidity is high, the humidistat will activate the fan to remove excess moisture from the air, which can help prevent mould and mildew growth, reduce odours, and improve indoor air quality. The humidistat also helps to save energy by only running the fan when it is needed, rather than constantly running it at full speed. Overall, the addition of a humidistat to an extractor fan can help to create a more comfortable and healthy living environment. Should I get a bathroom fan with a humidity sensor? Building regulations require that a domestic bathroom fan must extract a minimum of 15 litres per second. However, almost all extractors on the market exceed this and average 21-25 litres per second. There are even some models that go as high as 68 litres per second. The Envirovent SIL100T is probably the best overall extractor fan choice for a standard bathroom. Coming in white only, it should suit most bathrooms, but leaves it slightly limited when dealing with bathrooms of different colours.
The Envirovent SIL100T is a great all-round option and the most well-known brand. Reliable and well-built, this fan is easy to install and will work without you noticing it too much. Two speed options are available of 15 and 21 litres per second. 15 is the lowest extractors fans should be, so you have the option of increasing to 21 if you need more power or have a bigger bathroom.
Even if your fan doesn’t wake anyone, it might simply be an annoying sound. If you’re unwinding in the bath after a long day, the last thing you want is the drone of the extractor fan running. This is the cheapest fan we’ve tested, and it holds up well against the competition. Granted, it has less features than others (no timer or PIR) so if those are essential then this isn’t the fan for you. Extractors come in two sizes: 100mm/4 inches and 150mm/6 inches. In most cases, the 4-inch fan will remove moist air well enough to keep the bathroom smelling fresh and be less susceptible to mould. The only reasons you would need to consider a 6-inch extractor fan is if: It’s a good idea to look for a fan with an overrun timer. This means it will continue to run for a set period after you switch it off. In most cases, you won’t stay in your bathroom long enough for it to have removed all the humid air before you switch off the extractor.
Great Deal 
New Comment